Maxon MODMAX MM-6280IND Informations techniques télécharger pdf (Page 20)

Extended AT Commands Manual Page 20 of 70 2009-06-25

Command TE2

MT2 $$RESET

Response TE2

MT2 $$RESET: 1 | 0 (Success | Failure)

Note:

Using the new format with the old firmware R1.1.17 will cause the modem

to hang. For older firmware (R1.1.17 please use AT$$RESET=n where n is in

minutes)

5.1.1.6. Current time (AT$$TIME)

This command enables the user to view the current date, time and day.

Table 5-20 Read command

Command TE2

MT2 $$TIME

Response TE2

MT2 $$TIME: <yyyy-mm-dd,HH:MM:SS,sss(Day of Week)>

Value

sss: milliseconds

Day of Week: SUN, MON, TUE, WED, THU, FRI, SAT

5.1.1.7. Software version (AT$$SWVER)

This command enables the user to view the MT2 software version.

Table 5-21 Read command

Command TE2

MT2 $$SWVER?

Response TE2

MT2 $$SWVER: <software_version>

Example software_version: (example: CHM628 R1.1.18 [Jul 09 2007 15:35:17])

5.2. Power Conservation Commands

5.2.1.1. Sleep mode control (AT$$SLEEP_ENABLE)

This command is used for control of the Sleep mode of the engine. This is useful to reduce the

current draw for power conservation applications. The engine constantly cycles through

‘sleep’/‘idle’ modes when value is 1. This setting has no effect on the ability of the MT2 to MT or

MO calls.

Table 5-22 Read command

Command TE2

MT2 $$SLEEP_ENABLE?

Response TE2

MT2 $$SLEEP_ENABLE: <value>

Value:

0: Sleep mode disable

1: Sleep mode enable (Default)

Table Error! No text of specified style in document.-23 Set command

Command TE2

MT2 $$SLEEP_ENABLE=<value>

Response TE2

MT2 $$SLEEP_ENABLE: <value><result_code> (OK | ERROR)

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 69 70

Commentaires sur ces manuels

Pas de commentaire

Maxon MODMAX MM-6280IND Informations techniques Page 20

Commentaires sur ces manuels